blank screen on bizhub c451 after replacing mfp board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • paperjam
    • May 2025
    #1

    blank screen on bizhub c451 after replacing mfp board

    After replacing the MFP board on a Develop ineo +451/Konica Minolta bizhub c451, I keep getting a blank op's panel. I have replaced with two different MFP boards and same issue. Can anyone help me with this????
    Tags: bizhub, blank, c451, forgot, issue, konica, konica minolta, mfp, minolta, mrwho, panel, screen
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299
      #2
      Maybe the new board needs to be flashed with the firmware?
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • paperjam
          #3
          Thanks for quick response but tried updating firmware but cant get it done with flash card as screen is blank

            Comment

            • dallas
              Trusted Tech

              100+ Posts
              • Jun 2008
              • 115
              #4
              If you have forgot to connect the JMB-Board to the new MFP-PWB, you get a blank screen.

              MFP-JMP.jpg

                Comment

                • TheOwl
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Nov 2008
                  • 1732
                  #5
                  Also check the old board for CF cards. Can't remember if this model used them or not but same as the pic above, if you forget to transfer them to the new board then you can't upgrade the firmware.
                  Please don't ask me for firmware or service manuals as refusal often offends.

                    Comment

                    • RRodgers
                      Service Manager

                      1,000+ Posts
                      • Jun 2009
                      • 1947
                      #6
                      Originally posted by mrwho
                      Maybe the new board needs to be flashed with the firmware?
                      What he said. They do not come with firmware.
                      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                        Comment

                        Previous template Next
                        Working...