If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
That machine has only a network connector by default and that's what you should use to print and scan (I assume it is a C450 and not a C450P). You print/scan via network (or, if you don't have one, just use a crossover cable between the machine and the computer and do the proper configuration).
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
I have no idea if that'll work. If you don't know how to configure it or what a crossover cable is, you better get someone who know about networks in order to help you.
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Best to get a little router and a pair of standard ethernet cables, assuming you connect that same computer to the internet in some way or another, DSL or Cable. This way you can use some of the advanced features such as scan to email.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Comment