minolta C-220/280/360 transfer belt gets damaged

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • darrell b
    • Jun 2025
    #1

    [Misc] minolta C-220/280/360 transfer belt gets damaged

    has any one got any ideas how to stop the black picker finger on image trans belt unit from turning over and knackering the belt?
    Tags: 220, 280, belt, black, damage, image, minolta, secondary, stop, transfer, unit
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      Originally posted by darrell b
      has any one got any ideas how to stop the black picker finger on image trans belt unit from turning over and knackering the belt?
      Remove it, or better yet find out what stock they are running that causes that.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • Spidula
          Konica Minolta Technician

          50+ Posts
          • Apr 2010
          • 83
          #3
          I remove them and alter the secondary transfer voltages to about +4. Had no come backs as yet.

            Comment

            • darrell b
              #4
              cheers mate for advice,i had thought of that but was unsure if it was the right thing to do

                Comment

                • lanierboy
                  Trusted Tech

                  100+ Posts
                  • Apr 2008
                  • 149
                  #5
                  KM are testing a new type of picker finger to stop this happening, talk to your KM rep

                    Comment

                    Previous template Next
                    Working...