Re: Sending print job to c450 konica minolta data light blinks
C450? wow, this device is way out of its service life. The problem you're describing could be a number of things. However I must ask.. have you rebooted the fiery? (IC-402) If so this has a different power switch in the back of the machine. Power cycle the fiery. If the fiery needs reloading, you will need a trained technician. It could also be the OACB, or the fiery died.. but in that case I'd just take it to the scrap yard and then take the proceeds and buy a snow cone.
C450? wow, this device is way out of its service life. The problem you're describing could be a number of things. However I must ask.. have you rebooted the fiery? (IC-402) If so this has a different power switch in the back of the machine. Power cycle the fiery. If the fiery needs reloading, you will need a trained technician. It could also be the OACB, or the fiery died.. but in that case I'd just take it to the scrap yard and then take the proceeds and buy a snow cone.
Comment