I have a C200 in the field and have been asked to install a 3rd party vendor kit whick works with access cards. Having installed many such systems before I didn't think it would be a problem, but I can't seem to find the 4-pin connector to attach the device. On previous model the connector was always on the right hand side of the unit running alongside the scanner section. Has this changed or simply been ommitted on these models?
-
-
On some MFPs the connector is routed beneath the cover that needs to be removed to pull the platen glass. BH 501/350 etc...EmujoIf you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals. -
Yeah, I know about those cables and where they are.... question is, are they on the C200 or do I need a mount kit. The service manual mentions 2 types of mount kits, MK-718 & MK-723, neither of which are available in South Africa. It's not a problem to make one up, I just need to know which connector on the the mainboard to use and what the pinouts might be...Comment
-
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Comment
Comment