If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Part number for Konica Minolta DL460 finisher hardware
[Misc]
Part number for Konica Minolta DL460 finisher hardware
Good evening. I need assistance aquiring the part number for the pin (image 066) . It is attached to the main body (image 067) of the DL460 copier and tells the copier is in the correct positions any assistance would be deeply appreciated. Thanks.
