dialta 3010 driver for linux

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • perdanajayaabadi
    • May 2025
    #1

    dialta 3010 driver for linux

    can some one help me find the dialta3010 driver for linux???please help me,i'm really need it,...
    Tags: 301, 3010, dial, dialta, driver, help, info, linux, one, postscript, script
    • aleksander
      Trusted Tech

      250+ Posts
      • Jan 2010
      • 378
      #2
      unfortunately, there is no linux driver supported for Di3010.

        Comment

        • perdanajayaabadi
          #3
          owh,thx for your info guys,...

            Comment

            • johskar
              Solutions Engineer
              • Mar 2011
              • 22
              #4
              If you have the Pi3505e PCL Print Controller or Pi3505e PostScript 3 + PCL Print Controller.
              You can use the generic PCL5e/PCL6(PCL XL) and if the Postscript controller ither the PCL drivers or the Generic Postscript driver, ofc utilization of the Di's more advanced features will be limited due to using generic PCL/PostScript drivers and not a driver supplying settings that spessific models features.
              The wonderful thing about standards is that there are so many of them to choose from.

              Yes, I got ADHD, my posting can be quite chaotic at times!

                Comment

                • aesthetics1
                  Trusted Tech

                  100+ Posts
                  • May 2010
                  • 148
                  #5
                  Some of these machines won't have PostScript interpreters, also, keep that in mind. As mentioned above, a lot of generic PCL drivers will work just fine for regular printing on this machine.

                    Comment

                    Previous template Next
                    Working...