Hello,
I recently had a used BizHub 1050EP installed in my shop.
The machine is connected to my local network using TCP/IP, and DHCP.
I can print to the machine, ping the machine and even ftp the machine.
But when I point my browser to the machine I cannot see the web pages that the manual says i should see. I have PageScope WebServer enabled - but I can't see that either.
All I get is an "HTTP 404 Bad Request"
I'm using IE8 from a Windows XP 32 computer.
If anyone has any ideas on what is wrong and how to fix it, I'll be very grateful.
Thanx,
Doug
I recently had a used BizHub 1050EP installed in my shop.
The machine is connected to my local network using TCP/IP, and DHCP.
I can print to the machine, ping the machine and even ftp the machine.
But when I point my browser to the machine I cannot see the web pages that the manual says i should see. I have PageScope WebServer enabled - but I can't see that either.
All I get is an "HTTP 404 Bad Request"
I'm using IE8 from a Windows XP 32 computer.
If anyone has any ideas on what is wrong and how to fix it, I'll be very grateful.
Thanx,
Doug
Comment