KM c6501/5501 Address Book sync

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • einstein999
    Junior Member
    • Mar 2011
    • 7
    #1

    [Misc] KM c6501/5501 Address Book sync

    Can't seem to get the right tool for address book sync on a c5501 with ic-408 fiery. Used the address book utility (31mb file) listed under the "other" section of the IC-408, and used the Page Scope Data Admin v.4 (which works fine with c552 w/o fiery) I can get as far with the address book utility of having it scan the network and the password fails
    admin / Fiery.1 (which works for login direct to fiery etc..)
    Tags: 550, book, c550, fiery, file, login, network, password, scan, scope, sync
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      Originally posted by einstein999
      Can't seem to get the right tool for address book sync on a c5501 with ic-408 fiery. Used the address book utility (31mb file) listed under the "other" section of the IC-408, and used the Page Scope Data Admin v.4 (which works fine with c552 w/o fiery) I can get as far with the address book utility of having it scan the network and the password fails
      admin / Fiery.1 (which works for login direct to fiery etc..)
      Is the time right on the copier and the computer you are trying to sync with?
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • einstein999
          Junior Member
          • Mar 2011
          • 7
          #3
          I was not set for right time zone, but otherwise yes. I have tried as user: Admin admin Administrator administrator and for password I have tried Firey.1 and 12345678
          I kills me that its this "login" that separates me from being able to edit address book, anyone else successfully using this utility to get into their address book on their Fiery?

            Comment

            • RRodgers
              Service Manager

              1,000+ Posts
              • Jun 2009
              • 1947
              #4
              Try the copier admin and password. I don't believe the Fiery is holding the address info, I believe the copier is. Also, if you are connecting to it via the Fiery IP try the next digit up as the fiery will take that IP then assign the next IP up to the copier.

              Just a thought,
              Let us know how it works.
              Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                Comment

                • einstein999
                  Junior Member
                  • Mar 2011
                  • 7
                  #5
                  Originally posted by RRodgers
                  Try the copier admin and password. I don't believe the Fiery is holding the address info, I believe the copier is. Also, if you are connecting to it via the Fiery IP try the next digit up as the fiery will take that IP then assign the next IP up to the copier.

                  Just a thought,
                  Let us know how it works.
                  The Address Book Utility is what does the looking, so no IP is actually ever key. Also it scans the network and finds any IP it "likes", based on the engine you select. (it won't find the printer if I choose any other engine besides the c500)
                  I have tried every password (its brand new machine, no passwords have been changed)and no luck. I'm not sure at this point if I even have the right tool to get access.

                  Anything else to try, I'll all ears

                    Comment

                    • ineo+6501
                      Trusted Tech

                      250+ Posts
                      • Mar 2010
                      • 262
                      #6
                      Check that DATA ADMINISTRATOR is as up-to-date as possible, there may be a patch to add the 5501/6501 IC-408.

                      I have just had to patch DA V4 to be able to talk to a 283. Data Admin could see it in the add device screen but couldn't actually talk to it.
                      Downloaded and added the patch from CSES and it works a treat.

                        Comment

                        • einstein999
                          Junior Member
                          • Mar 2011
                          • 7
                          #7
                          Originally posted by ineo+6501
                          Check that DATA ADMINISTRATOR is as up-to-date as possible, there may be a patch to add the 5501/6501 IC-408.

                          I have just had to patch DA V4 to be able to talk to a 283. Data Admin could see it in the add device screen but couldn't actually talk to it.
                          Downloaded and added the patch from CSES and it works a treat.
                          Sounds like a great idea, I know I can add in manually the printer to Data Admin and it reads it features, but I cant register it. I am afraid I don't know what CSES is thought...

                            Comment

                            • ineo+6501
                              Trusted Tech

                              250+ Posts
                              • Mar 2010
                              • 262
                              #8
                              CSES is the technical support area of Konica Minolta, it is available only to dealers. If you are an end user, contact your service provider to help you.

                                Comment

                                • einstein999
                                  Junior Member
                                  • Mar 2011
                                  • 7
                                  #9
                                  Originally posted by ineo+6501
                                  CSES is the technical support area of Konica Minolta, it is available only to dealers. If you are an end user, contact your service provider to help you.
                                  New to copier lingo, I'm a network guy, and as the printers I setup typically have a "computer" inside them, its not a stretch to get them up and going. Our copier "only" techs typically don't do the networking/LDAP/DNS related stuff. I have access to mykonikaminolta.com, but not sure is CSES is same thing? or where to look.



                                  Uploaded with ImageShack.us

                                    Comment

                                    • Mr Spock
                                      Vulcan Inventor of Death

                                      1,000+ Posts
                                      • Aug 2006
                                      • 2064
                                      #10
                                      click ssd then the download and search for the c5501 and then utilities search for data admin (about 150meg) that should be the latest.
                                      And Star Trek was just a tv show...yeah right!

                                        Comment

                                        Previous template Next
                                        Working...