Bizhub pro C5501 problem with grey tones

[Guest]

[backspace]

I had the same problem, and I must tell you I did not manage to solve it. They seem to be to disadvantage

[ineo+6501]

Don't try to create grey from CMYK. Use only % of K and turn on "Pure Black" on the Fiery. I have my customers running this way and it produces much better results.
Also make sure the Fiery was calibrated with a spectrometer.

[condor99]

Tell your tech to drop the 2nd transfer roller pressure to low... this should help.. and mention to the tech to enable "thick paper mode"

[aleksandar_1978]

Tnx to all...

@condor99
Is this answer based on your experience?

[condor99]

Yes and it worked.

[condor99]

But i have a Creo Rip, not sure if that makes a difference.