C353p Flushing problem!

[boanda]

I cant flush machine. Every time when i put cf card(4 card tried) I see on display "invalid card"?
Its not firs machine trying to flush, so I hnow to make a firmware, until now. +machine want boot up now

I had booting up problem with other machine few week ago, flushed it and now it works fine

[rprem]

its a 128 mb cf card and use firmware imaging tool kit,card must be a problem

[boanda]

I tried 4 different cards,firmware imaging tool(2.1.7 and 2006 ) want read card and i made those in cmd, on the end of each process i see "verifying...OK"

[Zeldaman]

Hi there! Had a similar problem:board was gone (wrong colours,grey background) install the new board (!) and no firmwareupdate is possible. At the end there were 2 pins missing (broken!) and 2 badly bend. Ordering a new board then it was OK.
Greetings.....

[pantsman]

I cant flush machine. Every time when i put cf card(4 card tried) I see on display "invalid card"?
Its not firs machine trying to flush, so I hnow to make a firmware, until now. +machine want boot up now

I had booting up problem with other machine few week ago, flushed it and now it works fine

Excuse me, but you don't want to flush the machine at all..
what you want to do is flash the machine