[Misc] konica 363 drum message

[Guest]

I would like some help on how to make it so that the drum and dv message will not be dispalyed

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[Mr Spock]

Requires special firmware from Km and then service mode changes.

[bigdcopy]

does not require special firmware it is a dipswitch setting. will post it later.

[bigdcopy]

go to softswitch settings in the service mode and select switch 418 bit 3 and set it to a zero turn the main power switch off/on and this will change it. this works on 250, and 350 also