I have a KM c450 and when scanning multi pages the separate that to multi pdf don't put them into a single pdf. I search all properties but didn't find anything about this! what can i do thanks!
-
-
I know that was a thread about this I post a reply but nobody say anything -
Turn on the HDD in service mode and in the file type page of the scan settings choose multi-pageComment
-
I dont know how to turn on the HDD in service mode. how I do that? is not this stop00stop01? thanksComment
-
it is yesComment
-
but cant find that? In what menu is it?Comment
-
System2 -> HDD
I think' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
-
there only says 'installed' 'not installed'!Comment
-
So press installed.
Then come out of service mode.
enter the SCAN section
Choose Address
Choose "scan settings"
touch "file type", in there should be "single page" "multi-page". Choose multi pageComment
-
there's not! I cant find it!Comment
-
It should look like this. I have never seen this option missing, only when the HDD is not installed.Comment
-
You did cycle the main power after choosing HDD "installed" didn't you?Comment
-
perfect! Thanks a lot problem solved! I forget to cycle the main power!Comment
Comment