Hi,I am haven problem with this konica1216 it is displaying error code 09.please i need your help.THANKS IN ADVANCE.
-
-
Check this:
DESCRIPTION: F09 at power up.
CAUSE: Current flow to frame ground is detected. This may be caused by an external power surge or internal arcing.
SOLUTION: To reset the code, perform the following:
1. Power the copier OFF.
2. Access the 25 mode (power the copier ON while simultaneously pressing the 2 and 5 keys), P49 to 0.
3. Power the copier OFF/ON to exit the 25 mode.
4. When ready to copy is indicated, check for normal operation.
5. If the code reappears, replace the main CB (p/n 25LE-9320) or the high voltage unit (p/n 35EA84010).' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation! -
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads
Paul@justmanuals.comComment
Comment