[Misc] black line as thin as a hair

[Guest]

When I print there's a small black lines as thin as a hair. Stabilizing the machine would clear this?? What could it be? Heeelp!

[empiru]

And the machine would be.....? Anyway, in most cases it could be a problem of the cleaning blade not doing it's job right... or, it could be a fixing problem...

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[EarthKmTech]

can also be a scratched drum from the likes of a staple

[fixthecopier]

bet this is an End user, don't waste your time.

[EarthKmTech]

dont we waste our lives dealing with end users every day ?

[rumiayukawa]

It's a bizhub C451. I don't speak english very well but this was the only forum that I found hepful on the internet. So If you can help me I'd appreciate it. Recently we've had problems with the black IU, should I replace it? We don't have stapling unit. Thank you.

[Hansoon]

.............."We don't have stapling unit"........

Hans

[mrfixit]

There's your problem, if you get a stapling unit the line should go away.

[rumiayukawa]

[Hansoon]

tsk, tsk, tsk......