C252 New Transferbelt fuse

[BBT30]

Can anyone point me in the right direction to find a fuse for transferbelts in the KM Bizhub C252's? I would like to replace a blown fuse on a transferbelt for a C252 so the machine sees it as a new unit. I have tried 0.5amp and 800mA fuses. Both of which are to high to blow to reset the counter to 0. Any suggestions would be appreciated.

[laserman06]

What we use are F80MA/250V. Which is .080ma/250v fuses. Our company buys them in bulk. I don't know where. I will try to find out tomorrow and let you know.

These fuses will also work on C350/C450 fixing units and transfer belts as well as the C352 series transfer belts and Fixing units.

[peter lynn]

80 mA fuse is the correct one ,any that you have used will blow the main board fatal

Can anyone point me in the right direction to find a fuse for transferbelts in the KM Bizhub C252's? I would like to replace a blown fuse on a transferbelt for a C252 so the machine sees it as a new unit. I have tried 0.5amp and 800mA fuses. Both of which are to high to blow to reset the counter to 0. Any suggestions would be appreciated.

any thing over 80mA will have blown the main board,a fatal error im afraid

[BBT30]

Thanks!!

I tried the 80mA 250V buss fuse. Thanks for the info.

[bowser]

fuse

try a 1/16 picko amp fuse works on all models from 1501 to c650 both fuser and transfer eg simular to the one in the 350 fuser

[peter lynn]

Can anyone point me in the right direction to find a fuse for transferbelts in the KM Bizhub C252's? I would like to replace a blown fuse on a transferbelt for a C252 so the machine sees it as a new unit. I have tried 0.5amp and 800mA fuses. Both of which are to high to blow to reset the counter to 0. Any suggestions would be appreciated.

you need 80mAquick blow fuse,using anything bigger will probbably bang the main C.B.[i know!!]
happy copying peter