Cf2002 fusing unit reset

[Guest]

is there a way to re-set the fusing unit on a Cf2002 without purhasing a new one??

[wagon]

There is a 50mA fuse (with wires) hiding up inside the fuser. Be careful, things are quite fragile (lamps and such).

[bigpa]

Thanks for the advice but I can not find the fuse, you would not have a scheme?
PS excuse my English machine translation from Italian on google

[danito0203]

reset cf2002 fusing unit

hello.
did you find the way for reset cf2002 fusing unit?
need help also, can't find the fuser.
txs a lot

[bowser]

2002fuse

the fuse is a 1/16amp pico fuse and is behined the connector
remove the back panel of fuser be careful it is a loop back wire covered with heat shrik rubber tubing in the connector

[charlie eglinton]

Parts No. for the fuse

the fuse is a 1/16amp pico fuse and is behined the connector
remove the back panel of fuser be careful it is a loop back wire covered with heat shrik rubber tubing in the connector

Hi:
1.Where can I get the fuse, RadioShack? Or from Konica-Minolta.What is the parts # then?
2.Could you also clarify/ confirm 1/16amp pico fuse and not the 50mA fuse as mentioned by another member?
Thanks.

[bowser]

fuse

yes a 1/16 amp fuse ill get part #

[charlie eglinton]

cf2002 fusing unit reset

yes a 1/16 amp fuse ill get part #

Still waiting for the parts No. As it should be cheaper than buying a fuser reset module that allows you to reset the Fusing Unit instead of replacing it.The cost of the unit is $75.00 and only requires a new 200 mamp fuse ($1.00/each) each time you reset a fusing unit.(info obtained from the following site:Copy Life - Your supplier for IU boards for color copiers )

Any experience/feedback with this reset module,please share. We have both CF2002 and KM 8020 in this office.Thanks.