Key counter turnned on disables the Mode Memory option C253.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • oldschool
    Trusted Tech

    100+ Posts
    • Mar 2007
    • 245

    #1

    Key counter turnned on disables the Mode Memory option C253.

    There are three common vending modes; Key counter, Vendor1 and Vendor 2. The customer is using the key counter. When ever the key counter or vendor 1 are enabled the Mode Memory button is disabled. It's OK if Vendor 2 is enabled. Konica Minolta has done this with other features it feels do not work well in a vend environment like duplex. In the case of a disabled duplex there were secret software switches that Konica Minolta told us to change and duplexing worked again with a key counter. I've been through the manual and nothing jumped out at me. Does anyone know of a software switch to re-enable the "Mode Memory" button when in key counter mode.

    Thanks
    Jamex Tech Support: Saving the world one phone call at a time.
  • oldschool
    Trusted Tech

    100+ Posts
    • Mar 2007
    • 245

    #2
    Re: Key counter turnned on disables the Mode Memory option C253.

    Just gonna bump this once and then let it go gentle into that good night.
    Jamex Tech Support: Saving the world one phone call at a time.

    Comment

    Working...