[Error Code] Bizhub C451 error hdd

[tom5656]

Hello,
on my bizhub C451, from time to time he refuses to print.
Now I put the error code CD00F, I unplugged the hard drive, the error is the same.
I want to know by reloading the firmware through a compact flash card.
I found this but I do not know what it is.
KONICA MINOLTA PAGESCOPE SUITE [Download]

I try to do a reset but it leads nowhere.
Thank you in advance for future help.

[empiru]

Re: Bizhub C451 error hdd

Ehm... I admit, C451 series is not my thing but if you go to Service Mode, System 2, is there a HDD Installed/ Uninstalled option? And if yes, did you "uninstall" it after removing the hdd?

[tom5656]

Re: Bizhub C451 error hdd

ah yes, I do not have access to the service mode, it remains blocked most of the time on the hourglass.
Otherwise it directly displays the error as soon as it is close to a print.

[empiru]

Re: Bizhub C451 error hdd

Oh, ok. I think the problem is simple, I don't think you need to change the firmware... So, if the machine had a working HDD and you removed it, I'm pretty sure you must change the setting for it in the service mode; and in your case, you have to enter the Service Mode directly, I mean, with the machine turned off and turning it on while holding down some buttons... Unfortunately, I don't know how that is done for this specific type of machine; Perhaps someone else can guide you into doing that.
Anyone?

[tom5656]

Re: Bizhub C451 error hdd

ok, here's how:
Procedure
1. Press the Utility / Counter key.
2. Touch [Details] count on meter display.
3. Press the Following keys in this order.; Stop → 0 → 0 → Stop → 0 → 1

I will try this next weekend (I'm on vacation), but the problem occurred HDD in place, I thank you for having me informed on this issue.
Response of the verdict on Sunday, maybe Saturday night if I'm motivated.

[empiru]

Re: Bizhub C451 error hdd

ok, here's how:
Procedure
1. Press the Utility / Counter key.
2. Touch [Details] count on meter display.
3. Press the Following keys in this order.; Stop → 0 → 0 → Stop → 0 → 1

I will try this next weekend (I'm on vacation), but the problem occurred HDD in place, I thank you for having me informed on this issue.
Response of the verdict on Sunday, maybe Saturday night if I'm motivated.

Ok, it's pretty clear you didn't understand me because of my bad english (foreign language for me ). I know that procedure, it's being used for all KM color machines I service, but that's not what I meant. There are 2 ways of entering the service mode for each machine; One with the machine turned on (method described by you) and one with the machine turned off.. Do you understand what I mean? With the machine turned off, you enter the Service Mode DIRECTLY, without having to go through those steps... this method is very useful when the machines pop out service-codes because when entering the service mode directly, you don't give the machine a chance to do any adjustments, etc. I hope I explained it more clearly now... sorry, english is not my best friend

[tom5656]

Re: Bizhub C451 error hdd

I see the same type as to access the reset condition, it does not solve anything, my English is way too much better I speak french.
So I'm looking to access the service mode, someone to help me on this?

[JustManuals]

Re: Bizhub C451 error hdd

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[tom5656]

Re: Bizhub C451 error hdd

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

No thanks, pollueur, i have the field service, so...

[Ianizer]

Service mode access should still be available, even with service code.
I concur that uninstalling HDD electrically is necessary. In fact, that is all that is needed, without a physical disconnect, while you wait on New HDD.
-I

[tom5656]

Re: Bizhub C451 error hdd

Hello, I return to my problem, I get to "trouble reset" "ok", enuite j'appuis of "stop, 0, 0, stop, 0, 1," and I'm seeing a fraction of a second keyboard.
with the top left "imput password" and the top right "end".
The screen disappears and returns to "trouble reset", I think I'll kill this modite machine.

I also try to put another hard drive, the result is the same, the machine automatically create three partitions on the new hard drive. I sometimes have errors like "C-D004", "C-D010" and "C-D00F".
Good day to you all anyway.

[empiru]

Re: Bizhub C451 error hdd

Friendly advice: call a tech to come and fix that copier; if you would have done that 6 days ago when you started the thread, you would have been able to use the copier since 4-5 days ago..

[tom5656]

Re: Bizhub C451 error hdd

Hello, I agree with being able to bring a technician, but I want to reset it by myself. Why I want to know the keyboard to type the code only appears for a second, I think that reloading the firmware, it can solve the problem.

[AjitN]

Re: Bizhub C451 error hdd

[QUOTE=tom5656;236396]Hello, I return to my problem, I get to "trouble reset" "ok", enuite j'appuis of "stop, 0, 0, stop, 0, 1," and I'm seeing a fraction of a second keyboard.
with the top left "imput password" and the top right "end".
The screen disappears and returns to "trouble reset", I think I'll kill this modite machine.

Basically you need to input the password (92729272 ) & enter in service mode to uninstall HDD

Ajit

[tom5656]

Re: Bizhub C451 error hdd

ok, I'll test it by typing the code but without the keyboard that appears it seems to me bizarre. I'm also looking to test the firmware update, I have the tool to compile it on CompactFlash card.