Fiery X3e System Software CD

[copy shop]

I have tried to call and emailed Konica Minolta for help but this is their answer:

Hi, system code for the Fiery's is only available from Konica Minolta authorized and trained technicians. Please contact your service rep for assistance in this matter, thank you and happy holidays
-----------------------------------------------------
Fiery X3e System Software CD - The 2 files for the Dos setup

I want to install a new hard drives into 3 Minolta Pi6000Pro Servers.
These servers also only work with the Di-650, by the way
If AnyOne has the original X3e CD, I would be willing to purchase it.
I have the setup instructions if anyone needs it.
Thanks Tammy

[pepper38_cnd]

Are you sure its not the system code for the pi6500 Pro you are looking for? If so let me know.

[copy shop]

Re-Fiery X3e System Software CD

Maybe I do NEED the code if that is what they are calling it

BUT
The instalation for new drives refers to The 2 files for the Dos setup is

filename1 the smaller file from the Fiery X3e System Software CD AND
filename2 the larger file from the SAME Fiery X3e System Software CD

Thanks

P.S. I 'll take the code if that's what I need

Tammy

[pepper38_cnd]

I do not see a pi6000pro only a pi6500pro listed for the Di650, there is a ISO file (the original operating system) and many patches. If you can confirm that you have a Pi6500 pro I can see about downloading the files and getting them to you.

[copy shop]

Yes your right- My mistake It IS Pi6500 pro

Pi6500 pro
Mandalke@charter.net

I am on high speed

Thanks so much

[pepper38_cnd]

Glad to see things went the way they were supposed to with the Torrent File, Check your email for a YouSendIt link to download all the patches .

Good Luck

[copy shop]

The 2 files were exactly what was needed!

Again - The 2 files were exactly what was needed!

I already did the 3 servers and will worry about the printing part later, I have already set that up before, so that's not really a job.


OK....I'll be looking out for the patch files

Thanks again
Tammy

[pepper38_cnd]

WOW you did 3 servers on NEW YEARS DAY!

Tell your boss you deserve a raise.

[copy shop]

Thanks - a Raise would be nice

Do you know where I can download a service manual and suppoert solutions code infor for a Konica Color Force 8050.

I DID have another problem eailer tonight with the setting of the toner adding unit, but I got that figured out.

P.S. The 3 Minolta 6500 pro server I did on New years; YES That was an all nighter, but they All work great ! Thanks to your help.

Thanks again Tammy

[pepper38_cnd]

It's in the mail.

[baret]

Fiery X3e System Software CD

Hi,
I need to Fiery X3e System Software CD for a Minolta CF 9001.
Hellp me.
Thanks

[copy shop]

Fiery X3e System Software CD for a Minolta CF 9001

I don't personally have any of those model machines in my shop

Sorry

You can try this person pepper38_cnd

in the members section of this site area of Konica Minolta

[mitchl]

You mean to tell me that there is still a running 9001 some where in the world, now thats hard to believe!

I found version 2.0 on the site but its a huge file(146.7 megs) that would have to be burned and shipped, which I dont mind doing but not on my Fed-X account. Soooooo if you want to set up a will-call shipping deal for this let me know and I'll burn the system software disk for ya!

[copy shop]

About the CF 9001

I do not know anything about the CF 9001 .
I only deal with Toshiba 55/65/80 and now Konica 7165 and Di-650's.
I did do a couple of the Konica 8050 color machines
and cf 2002 and a Konic a 8031.

I have gotten my information from pepper38_cnd

[pepper38_cnd]

PM me I'll give you a link.