Not Installed toner on Konicaminolta Magicolor MFC 1690

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • perdana
    Technician
    50+ Posts
    • Jan 2008
    • 62
    #1

    [Error Code] Not Installed toner on Konicaminolta Magicolor MFC 1690

    I Have problem on Konicaminolta MFC 1690, They have code Not Installed Toner Check YMCK Toner. Please help me.
    Tags: 169, 690, check, cloth, code, installed, magicolor, mfc, stalled, toner
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Not Installed toner on Konicaminolta Magicolor MFC 1690

      This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

      Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

      Paul@justmanuals.com

        Comment

        • 1FRY1
          Technician

          50+ Posts
          • Nov 2010
          • 51
          #3
          Re: Not Installed toner on Konicaminolta Magicolor MFC 1690

          I Believe that machine is a four colour on a rotating cylinder

          The chip on each colour unit brushes past the the 3 pin connector as it rotates

          The chip is quite visible on the toner cartridge

          The chip is not contacting the connector Either because the connector is worn or bent or you are using aftermarket cartridges and the chip on the cartridge is faulty or badly placed

          You should hear the cylinder turning trying to make the machine contact the chip

          Hope that makes sense

          EDIT If it's not reading any of the chips the 3 prong connector is damaged I have had to replace one before a few years ago though

            Comment

            • ukyo
              Technician

              50+ Posts
              • Aug 2008
              • 51
              #4
              Re: Not Installed toner on Konicaminolta Magicolor MFC 1690

              Yep that machine has a 4 color on a rotating cylinder. Each toner cartridge has its own chip. Faulty chips occur very rare in some cases. Just clean/wipe the chip with a cloth damped with alcohol.
              If the 3 pin connectors are okay or not bent, clean it with a cloth or use a blower to get rid of the toners that fall on the pin connectors from the 4 toners as they rotate. That's the problem with 4 toners on a rotating cylinder..

                Comment

                • Toxic
                  Senior Tech

                  500+ Posts
                  • Dec 2009
                  • 697
                  #5
                  Re: Not Installed toner on Konicaminolta Magicolor MFC 1690

                  Just to confirm this printer have problem with 3 pin connector under rotating cylinder.
                  I have several cases where this was a problem and on few different printers what used same principle of reading toner cartridge ,example bizhub c10,magicolor 2490,...
                  Its little tricky to pull out and put back this 3pin connector but if you remove all toners and drum and have small fingers you manage to do that without any special problems.

                    Comment

                    • vtechplace
                      #6
                      Re: Not Installed toner on Konicaminolta Magicolor MFC 1690

                      Make sure the chips in position like the picture below

                        Comment

                        Previous template Next
                        Working...