Bizhub C7000 Scan Copy Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wildx
    Technician
    • Jul 2011
    • 10

    #1

    [Misc] Bizhub C7000 Scan Copy Issue

    I have a Bizhub C7000 that will only
    • copy 15 pages then stop
    • scan to PC via FTP 20 pages then stop
    if there are more pages to copy or scan the job has to be started again from the next page and manually put together or put together using PDF software.

    Any clues or answers to fix this would be much appreciated.
  • SCHWARZ
    Technician
    • Jun 2011
    • 47

    #2
    Re: Bizhub C7000 Scan Copy Issue

    try upgrade your firmware...

    Comment

    • richd
      Technician
      • Aug 2009
      • 49

      #3
      Do you have the hdd's and preview kit installed ?

      Comment

      • jrf
        Trusted Tech

        100+ Posts
        • Feb 2009
        • 142

        #4
        Re: Bizhub C7000 Scan Copy Issue

        Set scan mode to high compression,I think it's under scan settings on panel

        Comment

        • redhotrob
          Technician

          50+ Posts
          • Feb 2008
          • 69

          #5
          Re: Bizhub C7000 Scan Copy Issue

          Without the hard drive and preview kit, that's about all you'll get.

          Comment

          • wildx
            Technician
            • Jul 2011
            • 10

            #6
            Re: Bizhub C7000 Scan Copy Issue

            HDD are installed and working as per attached!
            Attached Files

            Comment

            • Tmjes

              #7
              Re: Bizhub C7000 Scan Copy Issue

              Fiery has nothing to do with it. HDD and Preview Kit for the C7000 itself are rquired for scanning and copying.

              Comment

              Working...