Bizhub C353 "License Management Error"

[Jorvikps]

[Copier Addict]

Re: Bizhub C353 "License Management Error"

I agree with Jorvikps. I have had this issue three times and all three times I was able to solve it by replacing EEPRom. Quick, easy and cheap.

[M3HR4N]

Re: Bizhub C353 "License Management Error"

OK for clarity, if you have a problem with "License management error" in _ANY_ machine type, please follow procedure below.

1. Go to the service mode and change machine serial number to A0R6021006374 (must be uppercase)
2. Reboot the machine (turn off/on main power switch)
3. Go again to the service mode, then [STOP]->[9], then [License Management]->[Initialize]
4. Use following initialization code: 2VRA4-UGGA2-Z2H4K-7AVUH-F58SW-J2Z7U-QVKVK
5. Reboot machine again
6. One more time go to service mode and set back your original serial number
7. Last reboot, and you should have no error


ANY means:
Bizhub 421/501
Bizhub 601/751
Bizhub 223/283/363/423
Bizhub 552/652
Bizhub 224e/284e/364e
Bizhub C203/C253/C353
Bizhub C220/C280/C360
Bizhub C224/C284/C364 also 'e'
Bizhub C454/C554 also 'e'
and so on...

Did anybody try this? Did it work?

[fishleg]

Re: Bizhub C353 "License Management Error"

Did anybody try this? Did it work?

I did on a c253 worked for me . Amazing bit of info thx very much.