c351

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wcody76
    Technician
    • Jun 2010
    • 20
    #1

    c351

    hey guys i have c351 that i changed the print controller now i get a error code cfe03 i tried formatting the hard drive i put the original nvram back on the board but when i scan it hangs up and gives the error code
    Tags: back, c351, code, controller, drive, error, format, print, roller, scan
    • Bernard
      Technician
      • Aug 2011
      • 14
      #2
      Re: c351

      Did you put the eprom from the old board to the new board? Also update the firmware

        Comment

        • wcody76
          Technician
          • Jun 2010
          • 20
          #3
          Re: c351

          yes to the eprom no the firmware unable to find a good card keep getting a bad cf card error and im formatting n putting firmware on with the imaging tool

            Comment

            • Bernard
              Technician
              • Aug 2011
              • 14
              #4
              Re: c351

              I was able to finally shoot it with USB card brand "DataStick Pro" 1 gigabit by Centon. I don't know why they are so touchy regarding the flash cards.

                Comment

                • SKTeK315
                  Walter

                  100+ Posts
                  • Jun 2009
                  • 142
                  #5
                  Re: c351

                  Yo. Wassap !!!I'll call Nelson. Just before u came to benchmark.

                    Comment

                    • Ianizer
                      Trusted Tech

                      250+ Posts
                      • Jul 2011
                      • 380
                      #6
                      Re: c351

                      That's an MFP board error.
                      I'd say go back and make sure you plugged everything in.
                      -I
                      My name Peggy.
                      You got problem?

                        Comment

                        • SKTeK315
                          Walter

                          100+ Posts
                          • Jun 2009
                          • 142
                          #7
                          Re: c351

                          Originally posted by Ianizer
                          That's an MFP board error.
                          I'd say go back and make sure you plugged everything in.
                          -I
                          U got the cards from the sourse. He uses them. I'm sure he gave u a few pointers.
                          There is a procedure how to do it. From before u turn off the Mach. & u have to turn off the Mach. Through removal, of card.
                          I think the sequence was wrong. Try again.

                            Comment

                            Previous template Next
                            Working...