Fiery C450 X3e setup procedure please

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Michelle W
    • May 2025
    #1

    Fiery C450 X3e setup procedure please

    Hi. We have Fiery X3eTY on C450, if someone could help with setup procedure. Currently not seen on machine. Thanks
    Tags: c45, c450, fiery, procedure, setup, system, work, x3e
    • urvi
      Technician
      • Sep 2010
      • 10
      #2
      Re: Fiery C450 X3e setup procedure please

      Reboot The Fiery & after this nothing happens you have reinstall system software on the Fiery by using software CD through network cable.

      Regards
      Anil

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Re: Fiery C450 X3e setup procedure please

          If the Fiery is installed correctly (scuzzy and x-over cables connected) you need to look at the image controller settings in service mode. Should be at a 1 for the fiery to be recognized. As to the setup instructions, search this site for other Fiery questions. Setup instructions are posted on here for a different problem within the last 2 months. Emujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            Previous template Next
            Working...