Konica Bizhub C220 C2 Firmware Setting

[jaderyan]

Re: Konica Bizhub C220 C2 Firmware Setting

Hello everyone,

please i need also the firmware update C6 for my konica c220, here is my mail if anyone can give : vjoffre83@gmail.com

Thans a lot

Re: Konica Bizhub C220 C2 Firmware Setting

Hi.. Just change switch 51 hex 10

In my case worked with switch 51 to F0...

[stefanv]

Re: Konica Bizhub C220 C2 Firmware Setting

Hi.. Just change switch 51 hex 10

[mitchl]

Re: Konica Bizhub C220 C2 Firmware Setting

Hello,

This is my first time i see this machine and my friend of mine has bought this one year ago,
now it displays need to change drum unit and can not print, i have seen your reply and with the Software switch can i get the massage not to be displayed with this modification?

please help me if possible, Boiken

First you must update the firmware to the proper version................ But seeing that the machine is down order a set of drum reset chips off Ebay and worry about the firmware update down the road.

[copyalbania]

Re: Konica Bizhub C220 C2 Firmware Setting

Hello,

This is my first time i see this machine and my friend of mine has bought this one year ago,
now it displays need to change drum unit and can not print, i have seen your reply and with the Software switch can i get the massage not to be displayed with this modification?

please help me if possible, Boiken

Thanks for the input, got that C6 now aswell.... im getting confused with this if someone could clear it up

"

Switch No.: 51
Hex Assignment - 00: Life warning is displayed. (Default)
Hex Assignment - 10: Life warning is NOT displayed.

Switch No.: 51
Hex Assignment - 00: Life warning is displayed. (Default)
Hex Assignment - 20: Life warning is NOT displayed."

It says to change switch 51 to both 10 and 20 but you can only set it once so which one is best 10 or 20? and if you do put it to 20 does this include the colour ius and black drum?

Regards

[tecnicoariel]

Re: Konica Bizhub C220 C2 Firmware

ftp://Pear_cloud.simitrix.dimitrix/p...r/c36-cseries/

Please tell me where from I can download firmware G00-C2 for konica Minolta Biz Hub C-220 machine.

[bende.laszlo]

[habik]

Re: Konica Bizhub C220 C2 Firmware

Please tell me where from I can download firmware G00-C2 for konica Minolta Biz Hub C-220 machine.

ftp://Pear_cloud.simitrix.dimitrix/p...r/c36-cseries/

Re: Konica Bizhub C220 C2 Firmware

Please tell me where from I can download firmware G00-C2 for konica Minolta Biz Hub C-220 machine.

[suso73os]

Re: Konica Bizhub C220 C2 Firmware Setting

Have to agree with most of this...how many times have you gone to a call and the PM indicator has been on for 10K clicks??? The only reason you got a call was due to the jam, or CQ issue....The problem with the KM color boxes (IMO) has been the complete shutdown of the MFP when a life counter has been met...Yes, you will eventually have to replace the unit, IU/ x-fer belt etc..., but I can already see a decrease in my parts cost per month since the implementation of this firmware...heads up for another issue though...since we are now turning off the life stops, and default all to B&W, look for color IUs going bad due to non-use...C353s are already having problems with color toner replenishment pipes/augers binding up due to toner clumps. Emujo

Hello all, I'm a photocopier technician and I Develop autorized dealer (ineo plus 451, ineo plus 203, ineo plus 452, ineo plus 220, etc) these machines are the same than Konica Minolta but As I can see in this forum we don't have the same bulletin information, I only have a service bulletin that talks about the imaging unit and the softswitch 51 to change it to Hex10 and not F0, and there isn't any information about the other softswith that you said (softswitch 55). I'll change these two softswitch and see what happen.


We only know the posibility to do this with this model, do you have more information about other machines like bizhub c451,c550, c203 to do the same thing with a new firmware? I tried to do that with this model with the lastest firmware I downloaded but I couldn't change these softswitches. Many thanks in advance.

[buscale]

Re: Konica Bizhub C220 C2 Firmware Setting

I have this firmware version, ineo+Amur_FW_vG00_C6, it's correct?

It's Develop firmware version, It'll work on KM machine?

Thanks

[Ianizer]

The dipswitches can be a little confusing...
One way to do it:
(This is on C650 class, so your C220 may be different. Someone check my work here.)

Navigate to SW #51.
Scroll to the binary assignment third from the right.
Select 1 on ten-key pad and touch "Fix".
Hex assignment should now be "41".
Don't forget to PO/PO after making this and your other settings.
Cruise back into service mode and verify your settings.

-I

[emujo]

Re: Konica Bizhub C220 C2 Firmware Setting

But you would say that wouldn't you!!! My experience is that customers take no notice of the oil can, or any other message for that matter!!

Have to agree with most of this...how many times have you gone to a call and the PM indicator has been on for 10K clicks??? The only reason you got a call was due to the jam, or CQ issue....The problem with the KM color boxes (IMO) has been the complete shutdown of the MFP when a life counter has been met...Yes, you will eventually have to replace the unit, IU/ x-fer belt etc..., but I can already see a decrease in my parts cost per month since the implementation of this firmware...heads up for another issue though...since we are now turning off the life stops, and default all to B&W, look for color IUs going bad due to non-use...C353s are already having problems with color toner replenishment pipes/augers binding up due to toner clumps. Emujo

Re: Konica Bizhub 420 Firmware Setting

Under my point of view new firmware's ( C2,C6) helps and are ok if your machines are for your use , but as logic end customers will call KM dealer's services after check the oil can icon, and this will not help too much to avoid their calls.
Is better to spend some $'s in chips and give an end solution ( with nothing flashing on their eyes ).
We have full line of chips including the C220,C280,C360 families for developing units in stock.
For any information don't hesitate to contact me sending private message.

Hi my name is Fidel DeSantaiago and with D & F Copier and I'm looking for the firmware for a Konica BizHub 420, can you help me.?

My e-mail address if fidel@dfcopier.com

[CHIPS HOME]

Re: Konica Bizhub C220 C2 Firmware Setting

There are customers who do not detect it at first tech51, as we told on thread we only offert you ANOTHER SOLUTION , because if sooner or later someone detect it and call , two days, a week or a month later your boss will find increased the service calls!. But it does not hurt to try upgrade firm and try :-), maybe half of them don't call you. It's up to you. Sooner or later consumables must be replaced that the crude reality!

By other side the notifications on PSWC, Fiery Remote Control Screen and CS do not change and Care end of life message is still apparent.

Best regards.