If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a customer who for some ungodly reason wants to hook up thier copier to a pc via the parallel port. They have the nic option installed but no network. Do I just need the drivers or is there some software they need?
if you setup as you would a network setup but select lpt1 port instead of a network port. But if you feel adventurous heres a chance to setup a simple network for your customer and make a few extra bucks on the side.
Get your facts first, and then you can distort them as much as you please.
Comment