Buzhub C451 scan to email via gmail smtp?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mungooz
    Technician
    • Dec 2007
    • 34

    #1

    Buzhub C451 scan to email via gmail smtp?

    I was wondering if anyone has been able to get scan to email using gmail's smtp server on the Bizhub C451?
    I've been able to do it on a Bizhub C252 at the same location where the C451 is, but when I use that same configuration on the C451 I get a "server tx error." I was wondering if anyone ran into this issue as well and if there were able to resolve it.
    Last edited by mungooz; 02-02-2008, 08:39 AM. Reason: moved to connectivity
  • Steve0
    A+, MCP, MCSE
    • Jan 2008
    • 13

    #2
    Originally posted by mungooz
    Bizhub C451 scan to email via gmail smtp?
    I think you already know Gmail server using 465 port.

    Here is the TIPs.

    E-Mail TX (SMTP) Setting - ON
    Scan to E-Mail - ON
    E-Mail Notification - ON
    Meter Count Notification - ON
    SMTP Server Address - Check and smtp.gmail.com
    Port No - 25
    Check Use SSL/TLS
    Port No. (SSL/TLS) - 465
    Connection Timeout - 60 sec
    Max Mail Size - No Limit
    Admin E-Mail Address - YrName@gmail.com
    Device Mail Address - YrName@gmail.com
    Authentication Setting
    POP Before SMTP - OFF
    SMTP Authentication - ON
    User ID - YrName@gmail.com
    Password - YrPassword

    Good luck

    Comment

    • mungooz
      Technician
      • Dec 2007
      • 34

      #3
      That configuration will not work on the C451. It will work on the C252 but not on the C451. This is an issue with the C451. At the moment, the only work around is to run MS IIS or some other SMTP relay that doesn't need SSL/TLS with authentication.

      Comment

      • climbguy

        #4
        I actually have a C252 and am having trouble getting the scan to email feature to work right. I tried to imput all the settings listed above and am still have problems. Do i need to list anything for the domain and are there any other settings or configurations I need to know in order to get it to work properly.

        thanks!

        Comment

        Working...