c252

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jackson007
    Trusted Tech
    100+ Posts
    • Jul 2010
    • 114

    #1

    [Electrical] c252

    sir,
    one of our costomers machine c252 is getting ready.all trays r full of papers but green light not coming.After tray selection also ,start button is not trasfering to green colour .only blinking in orange colour.
  • DCPS
    Trusted Tech

    100+ Posts
    • Mar 2008
    • 116

    #2
    Re: c252

    Was the M1 motor changed before that? Check the ICPs fuses on PWB-SIF. Have you tried to reload the FW? Check also PJ7 on DCPS.

    Comment

    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009

      #3
      Re: c252

      You should also be looking in service mode level histories to determine if IUs are low toner to carrier ratio, and fuser temp indications. Something is not happening during the warm up process that the MFP is waiting for but is not generating a failure code. Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: c252

        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

        Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

        Paul@justmanuals.com

        Comment

        Working...