8031 with Fiery 31 C-M-K version 1.2

[bboutain]

When sending a document to print, oftentimes an additional page prints before my document. It seems to happen if I change any of my printing preferences, such as switching to grayscale, etc.

The document reads:

@PJL COMMENT EFIPJL SET BOOKLET = GENERICOFF
@PJL SET MEDIATYPE = PAPER
@PJL COMMENT EFIPJL SET INTERLEAVE = GENERICOFF
@PJL COMMENT EFIPJL SET OHPTray = 4
@PJL ENTER LANGUAGE=PCL

Can anyone help me understand why this happens and how to make any adjustments to avoid this?

If you need more information, please ask and I will provide it.

Thanks in advance.

Bryan

[konisolver]

Looks like you are using a PCL driver which are causing the Fiery to print the page. I dont think that there is a PCL driver for the 8031. Download the PS driver from the Fiery and send the file again using the Ps driver.

[bboutain]

I do have the PS Driver available to install. The problem I have with the PS Driver is I lose all my installable options such as Finisher, Additional Tray choices, etc. I see them in the list as available, but the ability to add them is not available. There should be a button to select like there is when I have the PCL Driver chosen instead.