How to reset the Developer Counter for Bizhub C220

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rukshan4u2c
    Technician
    • Mar 2011
    • 49
    #1

    [Error Code] How to reset the Developer Counter for Bizhub C220

    Hi,

    I'm getting an error message displayed to replace Developer for magenta & yellow, and i need to reset the developer counter so that will eliminate the error message. Picture of the message attached to identify the problem
    Attached Files
    Tags: None
    • JSC
      Gimp

      500+ Posts
      • Dec 2006
      • 618
      #2
      Re: How to reset the Developer Counter for Bizhub C220

      Originally posted by rukshan4u2c
      Hi,

      I'm getting an error message displayed to replace Developer for magenta & yellow, and i need to reset the developer counter so that will eliminate the error message. Picture of the message attached to identify the problem
      You can either replace the units and the warning will disappear, or you can update the firmware and turn the warning off in tech rep mode.
      The gene pool could use a little chlorine.

        Comment

        • TheOwl
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2008
          • 1732
          #3
          Re: How to reset the Developer Counter for Bizhub C220

          You can also get a chip resetter and reset the chips in the IU.
          Please don't ask me for firmware or service manuals as refusal often offends.

            Comment

            • rukshan4u2c
              Technician
              • Mar 2011
              • 49
              #4
              Re: How to reset the Developer Counter for Bizhub C220

              Originally posted by TheOwl
              You can also get a chip resetter and reset the chips in the IU.
              How can i find the chips for the developer in the IU. I found some chips attached to the drum but i couldnt find the chips in the developer unit please help...is there a specific code to reset this error. Now the copier is stand still, cant do anything.

                Comment

                • rukshan4u2c
                  Technician
                  • Mar 2011
                  • 49
                  #5
                  Re: How to reset the Developer Counter for Bizhub C220

                  Originally posted by JSC
                  You can either replace the units and the warning will disappear, or you can update the firmware and turn the warning off in tech rep mode.

                  Can u please help me with the code to reset the counter of developer because it halted working due to this error. Please..

                    Comment

                    • emujo
                      Field Supervisor

                      2,500+ Posts
                      • Jun 2009
                      • 3009
                      #6
                      Re: How to reset the Developer Counter for Bizhub C220

                      Your MFP does not have a problem..this is what it is designed to do...when the IU/dev units reach their lifespans, they stop...you have 3 choices..spend 300+ for a chip resetter that may or may not work, replace the affected IU's/Dev units, obtain the firmware and update to the version that allows the units to run past life span. If you are a trained tech, the firmware is available on the KM web site. If not, hire a ***ing tech and have him/her fix your issue...these MFPs are not designed for the end user to perform anything more that basic maintenance. You are not going to be able to just "reset" the counter and go along fat, dumb anf happy. Emujo
                      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                        Comment

                        • JSC
                          Gimp

                          500+ Posts
                          • Dec 2006
                          • 618
                          #7
                          Re: How to reset the Developer Counter for Bizhub C220

                          Originally posted by rukshan4u2c
                          Can u please help me with the code to reset the counter of developer because it halted working due to this error. Please..
                          Like I said replace the dev units or get an engineer out to turn the dev life count off.
                          The gene pool could use a little chlorine.

                            Comment

                            • microofficesoultions
                              #8
                              Re: How to reset the Developer Counter for Bizhub C220

                              Hi there.
                              I'm an experienced engineer (10years). Drop me a mail, I'll help you out. Ben@microofficesolutions.co.za

                                Comment

                                • EarthKmTech
                                  Step aside, noob

                                  1,000+ Posts
                                  • May 2009
                                  • 2139
                                  #9
                                  Re: How to reset the Developer Counter for Bizhub C220

                                  change life stop mode to no stop, cold restart machine and away it will print untill it self destructs (wont get rid of warning though)

                                    Comment

                                    Previous template Next
                                    Working...