Bizhub Pro1050e " finisher is now operating" but it's NOT

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copycorner
    Technician
    • Apr 2010
    • 30

    #1

    [Misc] Bizhub Pro1050e " finisher is now operating" but it's NOT

    I have a perfect binder that I swap with a FS-503. I would get stapler problems intermittently and it would jam with the stapler head down
    through the set and then would say "finisher is now operating" but nothing would be happening. I would clear the jam and shut the copier off and on and the finisher would continue stapling. Now the finisher, when attached, is recognized by the copier so it gives me the staple option but when
    I start the copier the "finisher is now operating" immediately comes up. Also the interlock switch does not actuate with the machine not operating. So the stapler function is available but the door doesn't show either open or closed. (finisher not really recognized)
Working...