7155/65 warming up, no code

[superfly]

I thought i would share this with you guys-

If you ever run into one that constantly says 'warming up' and never comes ready or throws a code, the fuser connector in the back of the machine is likely broken.

[CMB]

or one of the heater lamps is burned out, or a cover is open somewhere??? my starting point would be to remove the lamps and ohm them out.

[random]

Thanks

[Pini9061]

7165 FAIL

if you have this code try to replace the TLD sensor under the drum

best reg
pini

[Sjeuf]

there is a microswitch under de fixing release lever ,confirm the right position of the lever,if this is good, check de switch good luck

[CMB]

there is a microswitch under de fixing release lever ,confirm the right position of the lever,if this is good, check de switch good luck

i believe you are thinking about the 7050/7055. a 7155 does not have that switch.