Need Firmware BizHub 600

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jakemoore
    • May 2025
    #1

    Need Firmware BizHub 600

    I purchased a business with a BizHub 600 and I need to upgrade the firmware so I can use Bonjour with the Macintosh computers. But I try to search and I just cannot find firmware on Minolta's website. Can anybody help me find firmware for my copier?

    Thank you,

    Jake

    Konika-Minolta BizHub 600
    ROM Version MFP Controller57AE-0100-G00-10-000 Operation Panel Message Data57AE-8100-G00-10-000 Fax Board Controller1 Fax Board Controller2 Image Controller57AA-1000-G00-10-000 Printer C157BA-8201-G00-10-000 Printer C257BA-8202-G00-10-000 Printer C357BA-8203-G00-10-000 Printer C457AA-8204-G00-10-000 Printer C557AA-8205-G00-10-000 ADF57AA-1000-G00-10-000 Punch & Z Unit Finisher
    Tags: None
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Re: Need Firmware BizHub 600

      Firmware is only available to current KM techs..not public stuff. If you're willing to pay for it, there are a few reliable techs who can get it to you.."manuals" is one of them...kinda suprised I haven't seen a reply from him yet...must be sleeping in..Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • jakemoore
          #3
          Re: Need Firmware BizHub 600

          That could be an acceptable solution for me if it is not pirate ware and priced right. I'll be hoping for a PM from one of these reliable techs!

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: Need Firmware BizHub 600

              Thanx Emujo............but I don't deal in K-M firmware.

                Comment

                • RRodgers
                  Service Manager

                  1,000+ Posts
                  • Jun 2009
                  • 1947
                  #5
                  Re: Need Firmware BizHub 600

                  Just pay a tech to do it.
                  Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                    Comment

                    • EarthKmTech
                      Step aside, noob

                      1,000+ Posts
                      • May 2009
                      • 2139
                      #6
                      Re: Need Firmware BizHub 600

                      this isn't a model that should be owned without a service agreement, maintaining them properly is a labor and parts intensive exercise. Low quality dusty paper will also kill this machine.

                      If you do have a service agreement, ask the 'tards looking after it why the firmware is so out of date

                      As for mac printing, you can still setup a mac to print via tcp/ip. (don't ask me how, but I've seen it done)

                        Comment

                        • TheOwl
                          Service Manager

                          Site Contributor
                          1,000+ Posts
                          • Nov 2008
                          • 1732
                          #7
                          Re: Need Firmware BizHub 600

                          Why don't you just use IP printing from your Macs?

                          Works better than Bonjour, don't need firmware and problem is solved now.

                          Other than that, you could spend thousands of dollars getting your self Konica Minolta certified, but that is probably out of the question hey?
                          Please don't ask me for firmware or service manuals as refusal often offends.

                            Comment

                            Previous template Next
                            Working...