[Misc] Minolta di 350 UNEVEN COPIES

[legaspiclg]

Good day to everybody, i have a Minolta Di 350 producing uneven copies, the print at the rear side is producing light copies, and on the front side it produces good copy quality.
Please help of how to adjust the correct settings, the imaging unit is new, a replaced the old imaging unit thinking that the problem came from the imaging unit, but when i replaced the IU the same problem occurs.
Many thanks.
Cesar

[JustManuals]

Re: Minolta di 350 UNEVEN COPIES

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[Hansoon]

Re: Minolta di 350 UNEVEN COPIES

If it happens also with internal printouts than it could be the laser slit glass being foggy.

Hans

[legaspiclg]

Re: Minolta di 350 UNEVEN COPIES

hANS,
Thank you very much for the info. I will try to locate where is that laser slit. Really i am not familiar with this machine as i have no service manual.
Anyway, thank you very much once again.
Cesar

[Hansoon]

Re: Minolta di 350 UNEVEN COPIES

http://img263.imageshack.us/img263/2030/shutterrip.jpg

Hans

[Hansoon]

Re: Minolta di 350 UNEVEN COPIES



Hans

[Joe Foe from Buffalo]

Re: Minolta di 350 UNEVEN COPIES

Google service manual/parts for machine and you will find it for free. I would also do a zoom up and down to find out if it is in optics. Sound like a bad roller in paper transport or dev. unit though.