Installing DF-611 on a C203 - says max pages exceed allowed 0

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bubblesquah
    Technician
    • Mar 2012
    • 17

    #1

    [Misc] Installing DF-611 on a C203 - says max pages exceed allowed 0

    I just picked up a C203 and subsequently purchased a DF-611 for it. I installed the DF-611 today, so far so good, except for one thing.

    When ever I load even one sheet of paper in it, a message pops up that says something like "the number of sheets in the ADF exceed the maximum allowed of 0". Sorry, I'm not at the office right now so I don't have the exact message.

    I'm assuming there is something else I need to do, but I am unable to locate any information on the installation of the DF-611.

    Any direction or assistance would be appreciated very much. Thanks!
  • Bubblesquah
    Technician
    • Mar 2012
    • 17

    #2
    Re: Installing DF-611 on a C203 - says max pages exceed allowed 0

    Here is exactly what is being displayed:

    "The number of originals exceeds the capacity of the document feeder tray specified with 0. Reduce the number of originals."

    Thanks again for any assistance!

    Comment

    • Bubblesquah
      Technician
      • Mar 2012
      • 17

      #3
      Re: Installing DF-611 on a C203 - says max pages exceed allowed 0

      Okay, well, I figured it out.

      The "brand new" DF-611 that I bought is faulty.

      How? Well, it is missing a few parts - like almost the entire paper feed section!
      Attached Files

      Comment

      • minimerlin
        Senior Tech

        Site Contributor
        500+ Posts
        • Nov 2007
        • 851

        #4
        Re: Installing DF-611 on a C203 - says max pages exceed allowed 0

        Originally posted by Bubblesquah
        Okay, well, I figured it out.

        The "brand new" DF-611 that I bought is faulty.

        How? Well, it is missing a few parts - like almost the entire paper feed section!
        Yup, that would cause a problem!!!
        Please do not PM me without asking first.

        Comment

        • Bubblesquah
          Technician
          • Mar 2012
          • 17

          #5
          Re: Installing DF-611 on a C203 - says max pages exceed allowed 0

          Originally posted by minimerlin
          Yup, that would cause a problem!!!
          Is is missing a bunch of parts, right?I can see the threaded plastic holes on the side where there used to be screws, etc. I looked at a copy of the parts manual with the exploded diagram (which is a bit confusing) to come to my conclusions.But the seller is wanting to tell me that he doesn't think it is missing anything. Does anyone have a picture of this same part of a DF-611 they would care to post so I can send him a comparison?
          Attached Files

          Comment

          • Avskrap
            Partner in crime

            100+ Posts
            • Jul 2011
            • 160

            #6
            Re: Installing DF-611 on a C203 - says max pages exceed allowed 0

            It's supposed to look like this, so yeah... Tell him to fix it, a.s.a.p.

            http://i39.tinypic.com/992l3d.jpg http://i39.tinypic.com/b7mneo.jpg

            Comment

            • Bubblesquah
              Technician
              • Mar 2012
              • 17

              #7
              Re: Installing DF-611 on a C203 - says max pages exceed allowed 0

              Originally posted by Avskrap
              It's supposed to look like this, so yeah... Tell him to fix it, a.s.a.p.

              http://i39.tinypic.com/992l3d.jpg http://i39.tinypic.com/b7mneo.jpg
              Great. Thank you very much!

              Comment

              Working...