C252 duplex printing

[paulrid]

Hi guys,

I have a C252 machine I'm setting up but I have a problem with duplex printing. I have adjusted the machine so when it scans simplex it prints the output in the same position but when I change it to duplex it prints the first scan i.e the simplex side in the wrong position both leading edge and side edge. I have checked the position on the glass during the scan and its in the correct place. I have looked through as many setting and I can see but I can't seem to find what's wrong, I have also looked in the service manual but I am still none the wiser, any ideas?

Thanks Paul.

[aligis]

Re: C252 duplex printing

try to select box ** booklet ** second to general Tab good luck