hi guys.ive been having problems with the color registration of a konica c220.the first half of the page is fine but on the second half the color registration is about 5mm out.it seems to be the cyan thats causing problems.have adj fuser speed and changed cyan iu.any ides?have also done firmware.machines done 350k.ive attached a sample S25C-212042508391.pdf
c22o colour reg probs
Collapse
X
-
Re: c22o colour reg probs
hi guys.ive been having problems with the color registration of a konica c220.the first half of the page is fine but on the second half the color registration is about 5mm out.it seems to be the cyan thats causing problems.have adj fuser speed and changed cyan iu.any ides?have also done firmware.machines done 350k.ive attached a sample [ATTACH]15674[/ATTACH]
looks like the classic sticking fusing loop sensor to me. -
kmhri5
Comment
-
Re: c22o colour reg probs
cheers for the ideas guys,ive been there today and it doesnt produce fault all the time.ive tried all suggestions with no joy.im starting to think it could be a laser problem or something more of a pain.ive performed the skew adj of ph unit in service mode .so i guess time will tell.any ideas are all welcome.will keep you postedComment
Comment