Adding print to C252

[repeatcopiers]

I have a c252 w/print and one without. What is involved is swapping the print to the copier w/o.

[Darren King]

Re: Adding print to C252

C252 came from factory with print onboard. It wasn't an option. It LAN connector is on the right hans side just above the scanner interface cable.
Hope this helps.
Darren

[TheOwl]

Re: Adding print to C252

Print and Scan from the factory.

You will just need to setup the device on the network correctly.

[montana]

Re: Adding print to C252

hi..you need cross cable to connect the machine then you set up as network printer...the printer is standard
on this model...thanks

[TheOwl]

Re: Adding print to C252

You don't need a cross over cable at all, but it will work.

Computers and Laptops and even switches auto sense on the ports and will automatically cross the TX and RX lines if required.

[mrwho]

Re: Adding print to C252

You don't need a cross over cable at all, but it will work.

Computers and Laptops and even switches auto sense on the ports and will automatically cross the TX and RX lines if required.

Most of them will, but not all.

[EarthKmTech]

Re: Adding print to C252

are you talking about one of those old school parallel port and usb port option cards ?

I actually have one of those sitting around collecting dust for some unknown reason.

But, as everyone else says, you can print via a correctly configured network setup.