konica minolta 6501 code C-6801

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • italo
    Technician
    • Apr 2012
    • 11

    konica minolta 6501 code C-6801

  • italo
    Technician
    • Apr 2012
    • 11

    #2
    Re: konica minolta 6501 code C-6801

    konica minolta 6501 code C-6801

    Comment

    • Kidaver
      Ghoulscout

      500+ Posts
      • Apr 2011
      • 912

      #3
      Re: konica minolta 6501 code C-6801

      communication error between OACB and OB1...check connections...then start replacing boards....
      "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

      Comment

      • italo
        Technician
        • Apr 2012
        • 11

        #4
        Re: konica minolta 6501 code C-6801

        Originally posted by Kidaver
        communication error between OACB and OB1...check connections...then start replacing boards....

        ok , now I GO to check connections,,

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9931

          #5
          Re: konica minolta 6501 code C-6801

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

          Comment

          • acsolutions
            Senior Tech

            500+ Posts
            • Jun 2010
            • 519

            #6
            Re: konica minolta 6501 code C-6801

            Has this problem resolved? I have a Oce CS650 I'm guessing is the same machine! customer says when they attached the stacker and the error occurred, so they say! tried error clear and wont go into service mode. I guess is the counter/ utility hold the power on, but no response, code wont clear. I dont have a manual and not sure what oacb and ob1 boards are and how they communicate. I do have all the accessories unplugged and it's just the machine.

            Comment

            Working...