Bizhub c6500 Error C 2713

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Marku
    Technician
    • Aug 2011
    • 28
    #1

    Bizhub c6500 Error C 2713

    Does anybody know what this error pertains to?
    Tags: None
    • Shadow
      PHD in Sh!t Disturbing

      250+ Posts
      • Sep 2011
      • 455
      #2
      Re: Bizhub c6500 Error C 2713

      Primary transfer/C was ON, primary transfer/C abnormality detection signal was continuously detected for the specified time.


      High voltage unit/2 (HV/2) / First transfer roller /C
      $hit Happens - Deal with it and move on.....................................sigpic....................................Lock & Load

        Comment

        • Marku
          Technician
          • Aug 2011
          • 28
          #3
          Re: Bizhub c6500 Error C 2713

          Thanks Shadow for the speedy reply. I'll get to check that out tomorrow.

            Comment

            • chriseckeard
              Junior Member
              • Jan 2013
              • 7
              #4
              Re: Bizhub c6500 Error C 2713

              Originally posted by Shadow
              Primary transfer/C was ON, primary transfer/C abnormality detection signal was continuously detected for the specified time.


              High voltage unit/2 (HV/2) / First transfer roller /C

              How do I diagnose/repair this? I have the Service manual which leads me to the same information but I'm missing the next step. Any direction is helpful. Thank you.

                Comment

                Previous template Next
                Working...