Konica Biz 451

[kmtech]

I have a customer that wants me to service a 451 and we were looking for some ideas as to getting parts and consumables. If you could give us some ideas we would appreciate it very much. Bill

[habik]

Re: Konica Biz 451

I have a customer that wants me to service a 451 and we were looking for some ideas as to getting parts and consumables. If you could give us some ideas we would appreciate it very much. Bill

C451 or 451?

[kmtech]

Re: Konica Biz 451

its a C 451, thanks

[habik]

Re: Konica Biz 451

its a C 451, thanks

What is the count on that machine? My experience is that pickup feed and separation rollers go after 100k per tray, what mods have been done on it? You may need bracket for Bk Imaging unit and Mylar strip for transfer section. Transfer Belt cleaning unit gears tend to wear out and fail to do cleaning Hope this helps you and PM me or send email and I speak to my boss to see what we can do for you. Speak tomorrow.