Di3510 error code

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RWAFA
    Technician
    • Aug 2011
    • 68
    #1

    Di3510 error code

    hi guyz,i have my machine a minolta Di3510 which is showing any error c0501,hw do i clear it?again what should i do to recover the admin code if it has been changed,plz help im stranded.
    Tags: None
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Di3510 error code

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

        Comment

        • blazebusiness
          SanDiegoCopierRepair.com

          Site Contributor
          1,000+ Posts
          • Apr 2010
          • 1250
          #3
          Re: Di3510 error code

          Originally posted by RWAFA
          hi guyz,i have my machine a minolta Di3510 which is showing any error c0501,hw do i clear it?again what should i do to recover the admin code if it has been changed,plz help im stranded.
          On a Di2010 or Di3510, the procedure is
          hit the small pinhole switch on the right side of the main panel, you must wait for the splash screen. Watch the left side of the screen for a dot to appear. When it does, push the number 3 putton on the panel.

          You will be asked for a code. Enter your 8 digit service code(I think the default is all zeros), then push end. You will then see a Trouble Reset button towards the bottom of the display. Hit trouble reset & the copier should be ready again unless the fuser is bad and needs to be repaired or replaced.
          sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

            Comment

            • RWAFA
              Technician
              • Aug 2011
              • 68
              #4
              Re: Di3510 error code

              Originally posted by blazebusiness
              On a Di2010 or Di3510, the procedure is hit the small pinhole switch on the right side of the main panel, you must wait for the splash screen. Watch the left side of the screen for a dot to appear. When it does, push the number 3 putton on the panel. You will be asked for a code. Enter your 8 digit service code(I think the default is all zeros), then push end. You will then see a Trouble Reset button towards the bottom of the display. Hit trouble reset & the copier should be ready again unless the fuser is bad and needs to be repaired or replaced.
              Thankx for the reply bro,i have tried all this but if i enter the code of 8 zeros it doesn't give the chance to go ahead, it returns to the previous page,meaning the code has been changed,so if u know how to recover the code,i think that is the only way to solve this problem.

                Comment

                Previous template Next
                Working...