If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
This machine has the DFPR Mod kit installed. New feed rollers, torque limitor, DFPR return spring and roller, Interlock switch. Still has issues with multifeeding. Any ideas?
I'm not familiar w/ that kit but make sure the spring and cap on the DFPV unit is taken out and the tension srping is on the hook for most pressure. Also check the one way gears for wear and dirt. R
Comment