Konica C451

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bobe
    Technician
    • Oct 2011
    • 38

    #1

    Konica C451

    Hy,

    I have this bizhub C451 and is jamming in secondary transfer unit J3001. I replaced all unit(second transfer unit), clean everything form paper tray rolles and sensors to fuser. The paper is stopping in the fuser and is foldit in 2 and is jamming every 10 copies. Thanks
  • minimerlin
    Senior Tech

    Site Contributor
    500+ Posts
    • Nov 2007
    • 851

    #2
    Re: Konica C451

    Originally posted by bobe
    Hy,

    I have this bizhub C451 and is jamming in secondary transfer unit J3001. I replaced all unit(second transfer unit), clean everything form paper tray rolles and sensors to fuser. The paper is stopping in the fuser and is foldit in 2 and is jamming every 10 copies. Thanks
    Make sure the turnover solenoid and the turnover moving guide are working correctly, sounds like the problem is in this area. Also check exactly where the paper is as you open the unit to clear the jam.
    Please do not PM me without asking first.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: Konica C451

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      Working...