bh 423,c-211,

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jackson007
    Trusted Tech
    100+ Posts
    • Jul 2010
    • 114

    [Error Code] bh 423,c-211,

    sir,
    In one of our costomers machine bh 423.getting c-c211.its due to nv ram board.can any body give the part no .or solution of it.requesting all .I searched it in parts manual,but not available.THANK U SIR.
  • jackson007
    Trusted Tech
    100+ Posts
    • Jul 2010
    • 114

    #2
    Re: bh 423,cc-211,

    sorry its c-c211

    Comment

    • aleksander
      Trusted Tech

      250+ Posts
      • Jan 2010
      • 378

      #3
      Re: bh 423,c-211,

      Originally posted by jackson007
      sir,
      In one of our costomers machine bh 423.getting c-c211.its due to nv ram board.can any body give the part no .or solution of it.requesting all .I searched it in parts manual,but not available.THANK U SIR.
      There is no part no. for NVRAM Board (NRB). You must contact your local distributor/principal. After you get the NRB, don't forget to rewrite the firmware to the MFP.

      Comment

      • jackson007
        Trusted Tech
        100+ Posts
        • Jul 2010
        • 114

        #4
        Re: bh 423,c-211,

        actually what may be the problem of c-c211

        Comment

        • jackson007
          Trusted Tech
          100+ Posts
          • Jul 2010
          • 114

          #5
          Re: bh 423,c-c211,

          Originally posted by jackson007
          actually what may be the problem of c-c211
          how can i solve c-c211

          Comment

          • Darren King
            copiertech

            500+ Posts
            • Jul 2007
            • 652

            #6
            Re: bh 423,c-211,

            Have you done a logical format of the HDD yet? That is the place to start. It could also be a problem with any authentication devices. (if installed). Or the connector for the NVRam.
            Start with the HDD.
            PS. All data will be lost from HDD after logical format.
            Darren

            Comment

            Working...