Konica /Minolta 5510

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • yormets
    Trusted Tech

    250+ Posts
    • May 2009
    • 336
    #1

    Konica /Minolta 5510

    This machine throws a constant 32-02, 32-01 error when trying to duplex. The paper jams up between the finisher and the main body. It does single sided just fine. Does the paper exit the fuser differently, or enter the finisher differently than one sided? Physically, everything looks ok. Is it an alignment problem?
    Roy
    Tags: None
    • nmfaxman
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2008
      • 1702
      #2
      Re: Konica /Minolta 5510

      It is the duplex feed clutch slipping before registration.
      Why do they call it common sense?

      If it were common, wouldn't everyone have it?

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: Konica /Minolta 5510

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


          Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            • mo0651
              Service Manager

              1,000+ Posts
              • Apr 2009
              • 1054
              #4
              Re: Konica /Minolta 5510

              in the fuser exit there is a foam roller that gets worn. Normally black in color. Also 2 gears that have oneways in them that wear.

                Comment

                Previous template Next
                Working...