Please give a help...

[Techaus]

I wanted to add a hard disk option to the print controller of 7022 series.I have opened the print controller (I guess IP 422) and found the place for the hard disk.Is it the notebook type hard disk to be attached? I had gone through the service manual and it is shown that hard disk type is PCMCAI type.If i am trying to insert a PCMCIA card there it is properly fixing there.
Is it really a hard isk itself to be fixed there or is it a PCMCIA card? The connectors at the print controller is male type and so is the connectors in the hard disk of notebook.Also the size is also not matched when I tried with the hard disk of notebook.So please advise me which type of hard disk to be added with the print controller.... Thanks a lot

[pepper38_cnd]

What you need is a 2G Compact Flash Card inserted into a PCIMCIA adapter then just slide it in. Note the card must be formatted with FAT ( FAT16 ).