minolta 1080 cs pro

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tigger1979

    #1

    [Jamming] minolta 1080 cs pro

    I have a
    minolta 1080 cs pro and it keeps on jamming right before the trans for i have replaced the wires and and still Jamming i dont know what to do it was working fine and now this HELP

  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3380

    #2
    Re: minolta 1080 cs pro

    Clean Sync and Pre-Sync clutches.

    Machine is too old to seriously invest efforts.

    Hans
    “Sent from my Intel 80286 using MS-DOS 2.0”

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: minolta 1080 cs pro

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • krm
        Trusted Tech

        100+ Posts
        • Aug 2009
        • 233

        #4
        Re: minolta 1080 cs pro

        Originally posted by tigger1979
        I have a
        minolta 1080 cs pro and it keeps on jamming right before the trans for i have replaced the wires and and still Jamming i dont know what to do it was working fine and now this HELP
        it is probably the clutches. Easy to access from back of machine. If that fails, take out trans/sep. unit and see if paper passes through the machine. The metal guide plate (ON THE TRANS/SEP. UNIT) may need to be slightly lowered. Also, cheat front door switch and watch the where paper jams. It could be hanging up on the drum separator claw. Adjust the claw closer to the drum or just remove the claw unit because adjusting the claw wrong may scratch the drum.

        Comment

        • ni311
          Senior Tech

          Site Contributor
          500+ Posts
          • May 2008
          • 658

          #5
          Re: minolta 1080 cs pro

          I can't believe these copiers are still in use nowadays....
          Konica Minolta Error Codes - Explanations and Solutions

          Comment

          Working...