Need access to KM website....

[Mita-Konica-Tech]

Is there any body out there (authorized KM dealer) that would transfer my Konica Minolta tech number to their company so I can get back on the web site....lost my access after leaving my last dealer....

in return you will be authorized (trained tech) on the following bizhub PRESSC7000/C6000/C70hc, bizhub PRO C6501/C5501/C65hc, C6500/C5500, bizhub, C652/C552/C452, bizhub C360/C280/C220, bizhub 1200/1051/951, Fiery Controller Classroom, bizhub 751/601/501 and a bunch of other printers and segment 2,3,4 machines.... your dealership gets a authorized tech listed with konica to meet your training goals/quotas and I get my access back to firmware updates...

PM me with phone number and email address

Thanks....

[JustManuals]

Re: Need access to KM website....

This is a joke right?

[Darren King]

Re: Need access to KM website....

Is there any body out there (authorized KM dealer) that would transfer my Konica Minolta tech number to their company so I can get back on the web site....lost my access after leaving my last dealer....

in return you will be authorized (trained tech) on the following bizhub PRESSC7000/C6000/C70hc, bizhub PRO C6501/C5501/C65hc, C6500/C5500, bizhub, C652/C552/C452, bizhub C360/C280/C220, bizhub 1200/1051/951, Fiery Controller Classroom, bizhub 751/601/501 and a bunch of other printers and segment 2,3,4 machines.... your dealership gets a authorized tech listed with konica to meet your training goals/quotas and I get my access back to firmware updates...

PM me with phone number and email address

Thanks....

RIIIIIIIIIIIIGHT!! Not likely!
Ya Paul, this must be a joke.

[KenB]

Step right up and lose your franchise!

[Tricky]

Re: Need access to KM website....

Is there any body out there (authorized KM dealer) that would transfer my Konica Minolta tech number to their company so I can get back on the web site....lost my access after leaving my last dealer....

in return you will be authorized (trained tech) on the following bizhub PRESSC7000/C6000/C70hc, bizhub PRO C6501/C5501/C65hc, C6500/C5500, bizhub, C652/C552/C452, bizhub C360/C280/C220, bizhub 1200/1051/951, Fiery Controller Classroom, bizhub 751/601/501 and a bunch of other printers and segment 2,3,4 machines.... your dealership gets a authorized tech listed with konica to meet your training goals/quotas and I get my access back to firmware updates...

PM me with phone number and email address

Thanks....

Fuck off

[JustManuals]

Re: Need access to KM website....

Is there any body out there (authorized KM dealer) that would transfer my Konica Minolta tech number to their company so I can get back on the web site....lost my access after leaving my last dealer....
snip....

And I bet it wasn't your choice that you did leave your last employer either.

[methogod]

Re: Need access to KM website....

Can you say UNDERCOVER? KM SPY?

[1FRY1]

Re: Need access to KM website....

try

Username *************

Password ************************************************** *******************

I Think I spelt it correctly

[methogod]

Re: Need access to KM website....

hey i was ready to give him access then i saw he was not trained on the C454/C554 & C654/C754 Line which is a deal breaker - let me know when you get certified.

[RRodgers]

Re: Need access to KM website....

How much ya paying?

[methogod]

Re: Need access to KM website....

starting up a remote help desk for other techs and NON KM TECH's figure it overlaps with what we already do, a few more tech's on call in the office to network at all times.

Tell me its not a good business. KM may not like it, but if we told them what we don't like ---we you get it....


on call remote support tech's depending on skill up to 15-20/hr but your prob only working 1 hour out of every 6. so more like 90-100/hr when you compound the time.

[JustManuals]

Re: Need access to KM website....

How much are you willing to pay?

[jackson007]

Re: Need access to KM website....

How much ya paying?

think world is with full of intelligents .fee like that. all are well educateds than u.dont try to make them fools.u (already) became fool .

[RRodgers]

Re: Need access to KM website....

think world is with full of intelligents .fee like that. all are well educateds than u.dont try to make them fools.u (already) became fool .

What?

[EarthKmTech]

Re: Need access to KM website....

think world is with full of intelligents .fee like that. all are well educateds than u.dont try to make them fools.u (already) became fool .

May want to get at least a loose grasp on the English language first in order to effectively call someone a fool, as it stands currently, your post is simply an embarrassment to yourself. Perhaps this is what you were aiming to achieve, but, we will never know.